|
Audia Flight Phono Preamp
After two years in development, Audia Flight is proud to introduce their new PHONO preamp.
A separate power supply, the dedicated input preamplifier boards, the high gain (74dB in its maximum selection), the low noise are only few of the characteristics.
A fully active phono preamp without a step-up transformer!
Of course the separate power supply was chosen to improve the shielding of the preamp and to reduce to zero the vibrations and resonance from the transformers.
On the preamp chassis, there is a low noise mosfet power supply for the second gain stage and another power supply for the first gain stage, so, in total, there are six power supplies!
It is possible to order the Audia Phono preamp with the input gain board desired (MM and MC, or two MM inputs, or two MC inputs).
On both input boards the impedance selectors are very close to the input stage and it is made by professional gold jumpers from the rear panel.
Custom resistors can also be used for precise cartridge matching. This is also done from the rear panel. The possibilities for impedance matching is infinite!
|
|
|
|
