The Audio-Technica LP60 is a fully automatic stereo turntable with aluminum platter, hinged dustcover, and built-in phono preamp. It can accommodate 33 and 45rpm discs, includes a proprietary moving-magnet phono cartridge (the stylus replacement is the ATN3600).

For the money, you can't beat this turntable. It truly stands out as a fine piece of audio equipment in a price range that is full of sub-par machines. We highly recommend this turntable for folks who are on a budget but still value performance. Especially if you are using it with a newer receiver that lacks a dedicated phono input, the LP60 is a great option.

User Manual Audio Technica LP60

Features:

Fully automatic operation

Two speeds (33 and 45rpm)

Aluminum platter

Integrated dual-magnet phono cartridge with user-replaceable stylus

Balanced tonearm with dampened cueing lever

Built-in switchable phono preamp.

Easily accessible front controls

Easy set-up and maintenance

Includes: Dual RCA (female) to 3.5 mm (1/8") mini-plug (male) stereo adapter cable; dual RCA (female) to 3.5 mm (1/8") mini-plug (female) stereo adapter cable; 45 RPM adapter

Specifications:

Type: belt-drive turntable, fully automatic

Platter: aluminum

Motor: DC servo-controlled

Wow and flutter: 0.25% WRMS

Signal to noise ratio: 50dB

Cartridge: intergral dual-magnet stereo cartridge with diamond stylus

Output: Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec

Output: Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec

Phono preamp gain: 38dB nominal, RIAA equalized

Power: 120V AC, 60Hz, 3W

Dimensions: 360.0 mm (14.17") W x 97.5 mm (3.84") H x 356.0 mm (14.02") D

Net weight: 6.6 lbs (2.98kg)

Furnished accessories: RCA-1/8" (3.5mm) mini-adapter cable, 45rpm adapter

click image to enlarge