The music hall mmf-11 turntable, our new flagship model, is a 2-speed belt driven audiophile turntable featuring the unique quadruple-plinth construction originated by music hall. The distinctive design isolates the critical sound reproducing components; platter, main bearing, tone arm, and cartridge on the top platform from the adjustable magnetic-levitation feet, microprocessor speed control, motors, flywheel, and wiring which are mounted to the bottom plinth. The motors, flywheel, and speed control are further isolated on their own vibration damped dual-plinth platform which is isolated from the upper three main plinths. Sorbothane hemispheres separate each of the three main plinths and provide additional vibration damping. The bottom plinth operates as a mass-loaded resonant sink for the entire turntable. Two motors and a flywheel are used to increase torque and speed stability. The mmf-11 comes in a high-gloss piano black lacquer finish and ships without cartridge. A large encapsulating acrylic dustcover is included.

Features:

music hall’s unique quadruple-plinth design w/sorbothane vibration isolation

one-piece Project ‘9cc Evolution’ carbon fiber tonearm

the arm uses four hardened Swiss ABEC 7 ball races in an inverted bearing design

tonearm is internally wired with flexible wire drawn from high purity copper with only two contact points from cartridge to output connectors

counterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damper

fully adjustable azimuth, VTA, and dampened arm lift

exclusive microprocessor electronic speed controlled dual motor single flywheel drive system

33 1/3 and 45 rpm speed change at the touch of button

motors and flywheel assembly are isolated on mass loaded resonant sink connected to the lower plinth

the dual motor flywheel system sits on the left side of the turntable thus eliminating all motor and belt vibration from the cartridge

magnetic-levitation adjustable feet

inverted ceramic main bearing for super quiet fluid operation

thick acrylic platter

removable acrylic dustcover

high quality gold RCA connectors with detachable phono cable

low noise fully manual belt-drive design, dustcover, 45rpm adaptor

ships securely in a substantial wood box

excellent instruction manual and easy assembly

Technical Data:

speed of turntable: 33 1/3 or 45 r.p.m.

change speed: electronically, luminous buttons

deviation speed: < ±0.1%

variance speed: < ±0.08%

mechanical distance: > -45dB

electrical distance: > - 65dB

drive: silicone belt over pulley

motor: 2 x synchronous motors, the motor is controlled via microprocessor

platter: acrylic (11.8 in., 300 mm) weight – (7.4lbs., 3.35 kg)

power: switching power supply (90 – 246 VAC, 47-63Hz) type EU, UK,USA

electric input: 23W DC

effective arm length: 9in. (230 mm)

effective arm mass: 8.5 g

mounting distance: 8.3 in (212 mm)

overlap: .71 in (18 mm)

angle crank: 24°

course zero error angle: ø 130.5, ø 243.7

force on the tip: 0-3 g

material of plinth: MDF

material of belt: silicone rubber

dimensions: 21.3 x 13.8 x 7.8 in (540 x 350 x 197 mm)

weight: 39.5 lbs. (17.9 kg)

Click Images to Enlarge