The Music Hall MMF-7.1 is a true audiophile-grade turntable that employs numerous features that are hard to find at this or any price point. This belt-driven design is built to make your vinyl records sound as good as they can.

Two-Plinth Design
The MMF-7.1 utilizes two plinths to block out any unwanted vibration from getting to the playing surface. These two plinths are separated with sorbothane pucks to ensure stability and keep the platter free of vibration. Adjustable spike feet support the plinths, making the turntable easy to level while dispersing unwanted noise. A circular cut-out in the plinth houses the motor and pulley, which are fully decoupled from the turntable, further isolating the vibration of the motor from any of the critical sound-reproducing parts

Carbon Fiber Tonearm
The wonderful Pro-Ject 9C carbon fiber tonearm is utilized on the Music Hall MMF-7.1. Carbon fiber is a light-weight, rigid material, that offers superior resonance control. Subtle features, such as lining up the counterweight's center of gravity to that of the stylus tip, enhance the stability of the stylus while it tracks the groove. The 9C tonearm uses high-purity copper wires terminated with gold-plated RCA jacks, allowing the user to upgrade interconnects if they like.

Platter, Mat, and Clamp
The Music Hall MMF-7.1 uses a heavy-duty acrylic platter, which is completely free of resonance. To boot, a soft felt mat is included so to care for the surface of the record. Music Hall's own record clamp is also included, which, when secured tightly on the threaded spindle, locks the record to the platter for ultimate stability, negating any slip and enabling the tonearm to perform and track at it's finest.

Fit And Finish
The plinths on the MMF-7.1 are finished with a high-gloss piano black, helping the turntable to look every bit as good as it sounds. Also included is a clear dustcover, which opens and closes on hinges at the rear of the turntable. Spike shoes are provided for the spike feet to nestle into, keeping your surfaces free of scratches.

Hifitest.de Review
...it simply fun to drive with this music, so neutral and incorruptible on the one side, so playful and colorful, he plays on the other side.

Amazon Review
...this turntable will easily outperform even very expensive audiophile CD players in sound quality.

Audioreview.com Review
...It has a great bottom end that is tight but well pounced.

Positive Feedback Review
...So how does it sound? I wish I could transport you to my living room to hear the angels sing.

User Manual

Features:

Music Hall’s unique dual-plinth construction

Carbon fiber tonearm with flexible internal wire drawn from high purity copper

Counterweight’s center of gravity is level with the stylus tip and decoupled from the arm, acts as a resonance damper

Completely isolated/decoupled AC motor with two-speed (33 and 45rpm) pulley

Factory-mounted Music Hall Mojo cartridge

Precision stainless steel main bearing sheathed in Teflon for noise-free operation

Non-resonant acrylic platter with metal screw-on record clamp and soft felt mat

High quality gold plated RCA connectors with detachable phono cable

Adjustable tip-toe feet with anti-scratch cups

Low noise fully manual belt-drive design

Hinged dustcover, 45rpm adapter, and spirit level

Excellent instruction manual and easy assembly

Dimensions: 18.25"Wx13.25"Dx5.5"H

Weight: 24lbs

Music Hall Mojo Technical Data:

Frequency range 20-30.000 Hz

Frequency response 20-30.000 Hz + 2 / - 3 dB

Tracking ability at 315Hz at recommended tracking force 90 µm

Compliance, dynamic, lateral 5 µm/mN

Stylus type Nude FG 70

Stylus tip radius r/R 5/70 µm

Equivalent stylus tip mass 0,3 mg

Tracking force range 1,25-1,75 g (12,5-17,5 mN)

Tracking force, recommended 1,5 g (15 mN)

Tracking angle 20°

Stylus colour Black

Output 3mV