At Ortofon we constantly look for new technology to be used in our products and push the performance of existing technology. Thus we assure the highest level of performance and quality. The Kontrapunkt models and MC Jubilee became market standards and are among our most popular cartridges. Nevertheless Ortofon decided to develop a new cartridge series that is even more ambitious. By carefully implementing cobalt-iron pole pieces, new improved winding process on the armature, using extruded aluminium housing in the models as well as other changes, we have been able to reveal new possibilities in performing the analogue information. It was also decided to make a more complete range of cartridges, which meant an introduction of a moving coil Cadenza Mono model to support our customers, who have an extended interest in micro groove mono records. We believe that our faithful and new customers will enjoy the playback of their precious analogue records even more now.
A little background info... Cadenza (from Italian: meaning cadence) refers to a portion of a concerto in which the orchestra stops playing, leaving the soloist to play alone in free time, without a strict, regular pulse. A cadenza can be written or improvised. It’s usually the most elaborate and virtuosic part that the solo instrument plays during the whole piece. At the end of the cadenza, the orchestra re-enters, and generally finishes off the movement. During the 19th century, composers began to write cadenzas out in full. Others wrote cadenzas for works, where the composer had intended for the solo to be improvised, in order for the soloist to have a well formed solo that they could practice in advance. Some of these have become so widely played and sung that they are effectively a part of the standard repertoire.
Details on the Ortofon Cadenza Bronze The Bronze model is using a Replicant 100 stylus and a conical aluminium cantilever. The coil wire is the famous Ortofon Aucurum wire, which is a gold plated 6NX copper wire. A Field Stabilizing Element, FSE, is used for optimal linearity especially during complex crescendo passages. Cadenza Bronze is a true high-end reference cartridge, conveying music with supreme precision, impact and dynamics. Its stereo imaging capabilities illuminate the farthest corners of the soundstage in all three dimensions.
Ortofon Cadenza Bronze Technical Data
Output voltage at 1000 Hz, 5cm/sec. 400 μV
Channel balance at 1 kHz < 1 dB
Channel separation at 1 kHz > 24 dB
Channel separation at 15 kHz > 20 dB
Frequency range at - 3dB 20 - 55 kHz
Frequency response 20 Hz - 20 kHz +1,5
Tracking ability at 315Hz at recommended tracking force 80 µm
Compliance, dynamic, lateral 12 µm/mN
Stylus type Nude Ortofon replicant,, conical aluminium
Stylus tip radius r/R 5/100 µm
Tracking force range 2,2-2,7 g (22-27 mN)
Tracking force, recommended 2,5 g (25 mN)
Tracking angle 23°
Internal impedance, DC resistance 5 Ohm
Recommended load impedance 50-200 Ohm
Cartridge body material Stainless steel / Aluminium
Share this product