|
Ortofon MC 5000 Low Output Moving Coil Cartridge
MC 5000 is a highly accurate, analytical and neutral transducer. All available information is retrieved from the grooves and music is crisply reproduced with palpable presence that converts your living room into a concert hall. A reference-grade audio system is required to reveal these qualities. Because output is relatively low, a high-performance MC transformer or MC preamplifier should be used. Recommended load: 20 – 100 Ohms.
The black ceramic body, sintered at approximately 1,200 degrees Celsius, is a rigid structure that eliminates resonances in the audible range.
Mounted on a sapphire cantilever, Ortofon’s Nude Replicant diamond is cut to match the sapphire which cut the record groove as closely as possible.
MC 5000 Technical Data:
Output voltage at 1000 Hz, 5cm/sec.: 140 µV
Channel balance at 1 kHz: < 0,5 dB
Channel separation at 1 kHz: > 25 dB
Channel separation at 15 kHz: > 15 dB
Frequency range: 5-80.000 Hz
Frequency response: 20-20.000 Hz + 2,5 / - 0 dB
FIM distortion at recommended tracking force, DIN 45.542: < 1%
Tracking ability at 315Hz at recommended tracking force: > 90 µm
Compliance, dynamic, lateral: 12 µm/mN
Stylus type: Nude Ortofon Replicant 100
Stylus tip radius: r/R 5/100 µm
Equivalent stylus tip mass: 0,25 mg
Tracking force range: 2,2-2,7 g (22-27 mN)
Tracking force, recommended: 2,5 g (25 mN)
Tracking angle: 20°
Internal impedance, DC resistance: 6 Ohm
Recommended load impedance: > 20 Ohm
Cartridge body material: Ceramic Sapphire
Cartridge color: Black
Cartridge weight: 9,5 g
Ortofon Moving Coil Cartridges PDF
Ortofon MC 5000 Technical Specifications
click image to enlarge
| 
