|
Pro-Ject 2 Xperience Classic Turntable in Black
Pro-Ject 2 Xperience Classic Features
Available finishes. Mahogany or olive veneer and piano-lacquered black
A quiet running AC motor with a two-step pulley drives the platter's outside edge via a belt.
The transparent acrylic plinth stands on three height-adjustable Sorbothane®-damped aluminium cones.
The motor is decoupled from the plinth to reduce vibration transmission.
The resonance-optimised platter is a sandwich construction utilising the hub, a fine-balanced medium density fibre platter weighing 2Kg, a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp.
The platter's low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered bronze bearing housing.
Connection to the phono input of the amplifier can be made with connecting cables of your taste through the gold plated phono sockets and earth screw. A standard cable is provided.
External power supply avoids potential electro-mechanical interference.
Pro-Ject 2 Xperience Classic Technical Data
Nominal speeds 33 / 45 r.p.m.
Dust cover yes
Record clamp yes
RCA phono sockets yes
Sorbothane-damped aluminium cones yes
Tonearm Pro-Ject 9cc
Tonearm with fibre armtube and sapphire thrust-pads yes
Effective tonearm length 9 " (230mm)
Effective tonearm mass 8,5g
Overhang 18mm
Supplied counterweight cartridge weight 6 - 10g
Optional counterweights cartridge weights 11 - 15g, 8 - 11g, 5 - 8g
Downforce range 10 - 30mN
Speed variance ±0,5 %
Wow and flutter ±0,08 %
Signal to noise -70dB
Platter weight/diameter 2kg/300mm
Power supply type Mains-fed outboard power supply
100 - 110V, 60 cycles
Output voltage 16V/500mA AC
Power consumption 2W
Dimensions (lid open) 460 x 390 x 460mm
Dimensions (lid closed) 460 x 133 x 360mm
Weight with 7,7kg
Tonearm 9cc Details
The headshell and armtube are fashioned from a single piece of carbon-fibre.
Conical armtube avoids standing wave reflections.
Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.
Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.
Design of counterweight effectively counteracts unwanted resonances.
The counterweight supplied is suitable for cartridges weighing between 6 - 10g
Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
Silicone-damped armlift can be adjusted to suit working height of the arm.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets.
Pro-Ject 2 Xperience Classic User Manual
Pro-Ject 2 Xperience Brochure
Pro-Ject 9cc User Manual
Pro-Ject 9cc Brochure>
|
|
|
|
