|
Pro-Ject RM-6.1 SB Turntable
RM-6.1 SB
The minimal, circular plinth repels external vibration using three-point aluminum cones and the decoupled motor mount virtually eliminates any motor noise or vibration. The massive resonance-optimized platter is sandwich constructed using medium density fiberboard, flat-ground vinyl mat and a brass record puck for stable and articulate imaging and sound staging. This assembly is coupled with the plinth via a stainless steel thrust bearing fitted with a ceramic ball and seated in a ceramic bearing plate for the best speed stability and lowest wow-and-flutter. A speed-box is included to provide easy speed change operations between 33-1/3, 45 and 78 rpm (depending upon motor pulley) for greatest speed accuracy. A high-precision aluminum tonearm and bearing housing is capable of being used with even the most demanding of moving coil phono stages.
Features
Resonance-optimized platter and plinth supported by three-point adjustable isolation feet
Ultra-quiet AC motor with two-step pulley and flat-ground belt decoupled from plinth
Electonically controlled speed change for 33-1/3, 45 and 78 rpm (pulley dependent)
Inverted bearing with stainless steel shaft and ceramic bearing / plate
Chassis mount RCA connectors allow for your personal choice of cables
External power supply avoids electro-mechanical interference
Specifications
Speeds: 33-1/3, 45 / 78 rpm (electronically controlled)
Deviation from nominal speed: >+-0.5%
Wow and Flutter:>+-0.08%
Rumble (max):>-70dB
Downward Force Range: 10-35mN
Supplied Counterweight: 80g
Optional Counterweight: 95g
Effective Tonearm Lenght: 9"
Effective Tonearm Mass: 11g
Overhang: 0.71"
Platter Weight / Diameter: 7lbs, 7oz. / 11.8"
Record Clamp: Brass Weighted Puck
Power Consumption: 2W
Dimensions (WHD): 15.2" x 6.7" x 13"
Weight: 17lbs, 6oz.
(A dust cover is not available)
Literature For Project RM-6
Owner's Manual For Project RM-6
| 
