|
Pro-Ject Turntables: Perspective
The Perspective is constructed using a visually stunning, clear acrylic plinth. Floating above the plinth is a sophisticated and complex sub-chassis system suspended by three height adjustable springs, which can then be variably damped in order to tune for various room conditions. Additional features included are: an aluminum alloy platter with a vinyl mat, a threaded record clamp, adjustable cone feet, and a silicone damping trough to eliminate unwanted resonance from the sub-chassis. A very stiff aluminum sub-chassis unites the platter and tonearm. The tonearm uses a conical carbon fiber arm tube and superior bearing assembly. Precision Swiss bearings in the tonearm help provide this turntable system with superior cartridge control. There are female, chassis mount RCA connectors on the rear panel to allow for the use of any single ended interconnect cables. 18 *"w x 6 *"h (dust cover down) x 14 *"d. 22 lbs.
Pro-Ject Turntables Perspective Features:
Visually stunning, clear, acrylic main plinth
3 point, suspended, rigid aluminum alloy sub-chassis with adjustable fluid damping
Belt driven
Rigid mounted, electrically and mechanically optimised separate 33rpm and 45rpm motors units for lower wow and flutter and better speed stability
Balanced Aluminum alloy platter with thick vinyl mat bonded onto the platter surface
Screw down record clamp
Chassis mount RCA connectors
Built in spirit level and adjustable cone feet for leveling of table and sub-chassis
Clear dust cover
Gold-plated RCA phono sockets
Dust cover
Sub-chassis decouples platter and tonearm
Stainless-steel axle runs on a Teflon bearing plate in a sintered bronze bearing housing
Pro-Ject 9c Carbon Fiber Tonearm Features:
9" precision tonearm with carbon-fiber armtube
Conical carbon-fiber armtube avoids standing wave reflections
Inverted bearing design with four hardened ABEC7 spec ballraces
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle)
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell
Highly flexible top-grade copper internal wiring.
Conical carbon fiber armtube allows adjustment of needle azimuth despite fixed headshell
Vertical tracing angle adjustable
Tonearm bearing comprises inverted hardened stainless-steel points and sapphire thrust-pads
Adjustable anti-skating
Manual, damped tonearm lift
Pro-Ject Turntables Perspective Manual PDF
Pro-Ject 9cc Tonearm Brochure PDF
| 
