Roksan TMS-2 Turntable

Function of a record player is to measure the groove with respect to time.

The more accurate is this measurement, the better is the performance of the record player. To measure something accurately, a reference point and its precise location is required. During this measurement the record is rotating and only one thing could locate the precise position of the groove and that is the stylus tip. So it is of paramount importance to keep the stylus/record contact free from any disturbances. The reference point is the axis of rotation. So it is equally important to avoid any 'wobble' in the main bearing.

Internal and external noise and disturbances would also impair the measurement. The stylus is fitted to the tone arm, which in turn is supported by the arm board. So the arm board/main bearing structure requires very careful design to ensure its complete mechanical integrity. The main bearing/platter/motor assembly should also work in such a way that the stylus/record interface is kept free from internal and external disturbances. In short the whole design unfolds from the stylus tip.

Design & Construction

The new TMS 2 incorporates a four-tier plinth structure based on the original TMS and the Xerxes.X design. This construction combines the best of both worlds and builds on the strengths of the original TMS.

Top and sub plinths are decoupled in the unique Roksan design to allow only 'sympathetic' movements, which do not interfere with the stylus/record interface. The top plinth is then supported on three new 'BLOBs' with no less than eight components in each of the supports to effectively isolate the measuring platform.

The unique Roksan self synchronising motor bearing is mounted on an Acetal base and secured to the motor plinth, which in turn is decoupled from the base plinth via three isolators.

The base plinth houses the XPS.V reference motor drive PCB and supports the motor and the top/sub plinths. The new spike adjustable feet locate into the feet bases coupling the record player with its support stand. The entire structure is designed to preserve the stylus/record interface. The main bearing spindle and ball are super precision made from tungsten carbide to eliminate noise.

Versatility & Performance

The construction of the TMS 2 facilitates setup of different tonearms by simply changing the arm boards. Plinth, platter and motor adjustments are also easily done thanks to the new four-tier plinth construction.

TMS 2's main bearing assembly is ground breaking in design and manufacture. The self -centering, self-aligning true single point main bearing eliminates noise and defines an unparalleled axis of rotation. This is sonically one of the major advances in the design of the TMS 2. All the aspects of the design are carefully considered to ensure performance second to none. It is with great pride to introduce this record player to our valued customers and assure them of our continued support in the art of analogue music replay.

Partnered with the new Artemiz tonearm and the Shiraz moving coil cartridge, TMS 2 will provide you with many years of musical enjoyment.

Features & Specifications of TMS-2