"Fundamental" - Mix/Spin
Skip Resistance: High
Output: High
Record Wear: Very Low
Sound Emphasis: Solid Bass With Clear Mids

This cartridge is an ideal choice for all-purpose DJ use.
- The M25C is our standard DJ needle for all applications.
- With a tracking force range of 1.5 to 3 grams, the M25C provides for significant skip resistance.
- Sharing Shure's versatile Type I cantilever design with the M35S and M35X, the M25C offers high-definition sound reproduction at all audible frequencies.

THE MOST DEMANDING DJ'S IN THE WORLD DEPEND ON SHURE NEEDLES

M25C Specifications:
Tone Arm Mount: Standard 1/2 inch
Cartridge Type: Moving Magnet
Output Voltage: Typical at 1 kHz, 5.0 mV RMS at 5 cm/sec peak velocity
Recommended Load: 47 kilohms in parallel with 450 p
Tracking Force Range: Effective at stylus tip, 1.5 to 3.0 grams
Stylus Cantilever: Shure Type 1: low mass, Heat-treated aluminum alloy / tubular, 1.0 mil wall thickness / 30 mil diameter
Diamond Stylus Tip: Polished natural gemstone: Spherical, Radius: 0.7 mil
Frequency Response: Essentially flat from 20 to 20,000 Hz
Stereo Channel Balance: Within 2 dB
Channel Separation: Typical at 1 kHz: 20 dB
Net Weight: 6.2 grams
Height: 15.9 mm
Warranty: Full one-year

Accessories Included
- Extra Set of 4 Headshell Wires (4-99)
- Stylus Cleaning Brush
- Headshell Weight (3 grams)
- User Guide
- Mounting hardware
- Stylus guard

Replacement Needles
- Single with box & User Guide N25C
- 4 Pack mounted on a card N25CQ
- 12 Pack mounted on a card N25CZ
Accessory Needle
- For wide groove / 78 RPM recordings N78S