Shure M35X

House/Techno - Mix/Spin
Skip Resistance: High
Output: High
Record Wear: Very Low
Sound Emphasis: Extreme Clarity And Deep Drop Bass

The M35X brings music alive by capturing every nuance of a recording from deep drop bass to exceptionally clear mid and high frequencies. Designed specifically for use with House/Techno mixing environments, the cartridge's low record wear helps DJs preserve hard-to-replace vinyl, while its high skip resistance serves as a safeguard against the hazards of back-cueing.

The M35X combines high sonic accuracy and incredible skip resistance, all while keeping record wear to a minimum.
- The M35X's versatile Shure Type I medium-diameter cantilever can stand up to continuous, demanding use, yet it is compliant enough to trace signal modulations as small as a millionth of an inch.
- With a tracking force range of 1.5 to 3 grams, the M35X provides considerable skip resistance.

THE MOST DEMANDING DJ'S IN THE WORLD DEPEND ON SHURE NEEDLES

M35X Specifications:
Tone Arm Mount: Standard 1/2 inch
Cartridge Type: Moving Magnet
Output Voltage: Typical at 1 kHz, 6.0 mV RMS at 5 cm/sec peak velocity
Recommended Load, 47 kilohms in parallel with 450 p
Tracking Force: Effective at stylus tip, Range: 1.5 to 3 grams
Stylus Cantilever: Shure Type I: Low Mass, Heat-treated aluminum alloy / tubular, 1.0 mil wall thickness / 30 mil diameter
Diamond Stylus Tip, Polished natural gemstone: Spherical, Radius: 0.7 mil
Frequency Response, Essentially flat from 20 to 20,000 Hz
Stereo Channel Balance, Within 2 dB
Channel Separation, Typical at 1 kHz: 20 dB
Net Weight, 6.2 grams
Height, 15.9 mm
Warranty, Full one-year

Accessories Included
- Extra Set of 4 Headshell Wires (4-99)
- Stylus Cleaning Brush
- Headshell Weight (3 grams)
- User Guide
- Mounting hardware
- Stylus guard