Standard - Scratch/Mix/Spin Skip Resistance: Very High Output: High Record Wear: Low Sound Emphasis: Clarity Throughout The Frequency Range
The SC35C is our standard DJ needle for all applications. - With a tracking force range of 4 to 5 grams, the SC35C provides for significant skip resistance. - Sharing Shure's versatile Type I cantilever design with the M35S and M35X, the SC35C offers high-definition sound reproduction at all audible frequencies.
THE MOST DEMANDING DJ'S IN THE WORLD DEPEND ON SHURE NEEDLES
SC35C Specifications: Tone Arm Mount: Standard 1/2 inch Cartridge Type: Moving Magnet Output Voltage: Typical at 1 kHz, 5.0 mV RMS at 5 cm/sec peak velocity Recommended Load: 47 kilohms in parallel with 450 p Tracking Force Range: Effective at stylus tip, 4.0 to 5.0 grams Stylus Cantilever: Shure Type 1: low mass, Heat-treated aluminum alloy / tubular, 1.0 mil wall thickness / 30 mil diameter Diamond Stylus Tip, Polished natural gemstone, Spherical, Radius: 0.7 mil Frequency Response: Essentially flat from 20 to 20,000 Hz Stereo Channel Balance: Within 2 dB Channel Separation: Typical at 1 kHz: 20 dB Net Weight: 6.2 grams Height: 15.9 mm Warranty: Full one-year
Accessories Included - Extra Set of 4 Headshell Wires (4-99) - Stylus Cleaning Brush - Headshell Weight (3 grams) - User Guide - Mounting hardware - Stylus guard
Replacement Needles - Single with box & User Guide SS35C - 4 Pack mounted on a card SS35CQ - 12 Pack mounted on a card SS35CZ Accessory Needle - For wide groove / 78 RPM recordings N78S