The new Acrylic-Series is stunning - not only from a visual point of view. Thanks to elaborate control circuitry, an extremely stable acrylic plinth and a heavy aluminium platter, the turntables are made to sound as exciting as they look.
The external motor unit of the Thorens Acrylic-Series was constructed in a way that there is no mechanical contact to the plinth, thus avoiding transfer of vibration. In addition, the entire turntable rests on special feet which effectively dampen all kinds of air-born or footfall vibrations and eventually ensure a continuous, undisturbed run of the platter.
The TP 92 tonearm, which was specially designed for Thorens turntables, uses an ultra-low-friction bearing and an innovative magnetic anti-bias system with zero stiction. The arm tube is made from rolled aluminium that is damped using random-mass-reducing technology. The brass counterweight at the end of the arm tube is double-decoupled, and the tonearm is so designed that its centre of gravity is level with the stylus.
Tonearm Details The TP 92 is a nine-inch cardanic design that follows the Loefgren geometry. It was developed in parallel with the TD 309 turntable, which allowed our designers to achieve optimal compatibility. The horizontal bearing is a high-precision Japanese ball bearing that uses a specially developed oil. It is located underneath the tonearm tube at the same level as the stylus for enhanced stability. The counterweight, decoupled by two rubber rings, is also exactly level with the stylus.
The tonearm tube is manufactured from high-quality cold-forged aluminium. A laser vibrometer was used to analyse the tube’s resonances, enabling our designers to target specific frequencies.
The headshell is also made from aluminium and tightly coupled to the tube for increased stability. Overhang can be adjusted either by sliding the headshell into the desired position on the tube or by adjusting the entire tube in the bearing block. The tube can also be rotated on its axis in order to adjust azimuth. The shape of the headshell ensures that the pick-up cartridge’s centre of gravity is always directly underneath the tonearm tube, thus preventing torsional vibrations.
VTA can be easily adjusted by loosening the arm collar lock nut and raising or lowering the entire tonearm. The anti-skating force is provided by two ferrite magnets and can be increased or decreased with the help of an adjustment screw.
Drive System belt-drive (square belt around platter rim)
Motor electronically controlled synchronous AC motor