|
LKG-PRE600 Moving Magnet Phono Preamplifier
This high quality stereo preamplifier will allow you to replace a Crystal or ceramic stereo cartridge with a better quality magnetic stereo cartridge while using the original stereo amplifier supplied with your turntable. The us of the preamplifier in conjunction with a magnetic cartridge will give you CD quality sound out of your vintage turntable.
Solid State Moving Magnet Stereo Phono Preamplifier
How To Instal
1). Connect shielded cable from the record changer to the appropriate input jacks on the PRE600.
2). Connect the other shielded cable from the out put jacks on the PRE600 to the high level inputs on the amplifier. On a stereo amplifier these will be marked crystal, ceramic or AUX.
3). Plug the line cord into any 117V AC outlet. Even though the power requirement of the PRE600 is very low, it is recommended that unplug the AC cord if you do not plan to use it for a long period of time.
4). NOTE: If your changer is equipped with a ground lead, connect it to the amplifier chassis, not the preamplifier.
Specifications:
Imp: 50K Ohms
Response: 30-20K Hz
Gain: 50X(10V in + 5V out)
Max Output: 1.8V
Power requirements: 117 VAC. 50/60 Hz, 0.1 Watt
Max. input: 30Mv
S/N Ratio: Over 60 dB
Made In China
| 
