Audience Au24 SE Stereo Phono Cable - Low Z
Given the extremely fragile nature of the phono signal, every effort must be pursued in order to preserve the integrity of that signal throughout the signal path. One area where the signal can suffer significant damage and loss is in the phono cable. Cartridge output levels are quite low, typically in the 3-5 millivolt range, and sometimes as low as 100 microvolts. Audience's use of continuous cast high-purity copper as well as low-loss cable geometry preserves the purity of this low-level signal. Audience has conducted considerable research into the electrical characteristics of phono cables and has concluded that a single cable cannot possibly serve as an optimal tonearm-to-phono-stage interface. The different internal electrical characteristics of phono cartridges make choosing a cable designed to preserve and enhance those characteristics an all-important issue. By choosing the wrong cable you can lose precious low-level detail that is essential to the overall sonic presentation. For these reasons, Audience offers vinyl lovers a choice of three impedance-matched phono cables. Each model is designed to carefully optimize the electrical characteristics of the cartridge to the cable and to preserve signal flow to the phono stage without detrimental influences as follows:
Low Z - for moving coil cartridges with internal resistance up to 30 ohms. High Z - for moving coil cartridges with internal resistance between 30 and 100 ohms MM - for all cartridges with internal resistance above 100 ohms, which includes moving coil cartridges rated at 47k ohms as well as most moving magnet and moving iron cartridges. Additionally, the thousands of crystalline barriers present in all conventional copper wire requires energy to pass from one barrier to the next. This energy, which is part of the signal, becomes lost in this process. When dealing with ultra low-level signals, particularly those in phono cables, these harmful crystal barriers are significant impediments to the transmission of critical musical information. For this reason, all Audience phono cables are constructed using the highest purity oxygen-free continuous-cast copper.