Unprecedented ValueSince its introduction more than 30 years ago, Audio-Technica’s pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. An excellent affordable introduction to the characteristics that is moving coil.
OC9X Design ElementsThe AT-OC9XEB Dual Moving Coil cartridge with bonded elliptical stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion. Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and pure iron yoke that increase the magnetic energy, and the bonded elliptical stylus on an aluminum cantilever that accurately tracks the record groove. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.
Features:Dual Moving Coil design, featuring independent coils for both left and right channels, provides outstanding channel separation The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required Features low mass bonded elliptical stylus and aluminum cantilever A neodymium magnet and pure iron yoke provide increased magnetic energy Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction Pure copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer
Technical:Type: Dual Moving Coil Body Material: Aluminum Frequency Response: 20-30,000 Hz Channel Separation: 25 dB (1 kHz) Vertical Tracking Angle: 20° Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) Recommended Load Impedance: Min. 100 ohms (when head amplifier is connected) Coil Impedance: 12 ohms (1 kHz) DC Resistance: 12 ohms Coil Inductance: 25 mH (1 kHz) Output: 0.32 mV (at 1 kHz, 5 cm/sec) Channel Balance: 1.5 dB (1 kHz) Stylus Shape: Elliptical bonded Stylus Type: Bonded round shank Stylus Curvature Radius: 0.3 x 0.7 mil Cantilever: Aluminum pipe Static Compliance: 20 x 10-6 cm/dyne Dynamic Compliance: 9 x 10-6 cm/dyne (100 Hz) Wire Used for Coil: PCOCC Terminal Pins: Brass Mount: Half-inch Weight: 7.6 g (0.3 oz) Dimensions: 17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.7 mm (1.01") D
Package Contents:Non-magnetic screwdriver 2 washers Cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2) Plastic protector Stylus brush