• Home
  • Audio Technica AT-OC9XSH - DEMO

Audio Technica AT-OC9XSH - DEMO

(0) No Reviews yet
$589.00
SKU: AT-ATOC9XSHCLOSEOUT

Details

About 50 hours of use. Inspected & tested - our return policy & Audio-Technica's warranty apply.

List Price: $650

Features:

  • Dual Moving Coil design, featuring independent coils for both left and right channels, provides outstanding channel separation
  • The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion
  • The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required
  • Features nude Shibata stylus and boron cantilever for rich full-range audio reproduction and high transient response
  • A neodymium magnet and permendur yoke provide dramatically increased magnetic energy
  • Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction
  • Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer
  • Technical:

  • Type: Dual Moving Coil
  • Body Material: Aluminum
  • Frequency Response: 20-47,000 Hz
  • Channel Separation: 27 dB (1 kHz)
  • Vertical Tracking Angle: 20°
  • Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
  • Recommended Load Impedance: Min. 100 ohms (when head amplifier is connected)
  • Coil Impedance: 12 ohms (1 kHz)
  • DC Resistance: 12 ohms
  • Coil Inductance: 25 mH (1 kHz)
  • Output: 0.4 mV (at 1 kHz, 5 cm/sec)
  • Channel Balance: 1.0 dB (1 kHz)
  • Stylus Shape: Shibata
  • Stylus Type: Nude square shank
  • Stylus Curvature Radius: 2.7 x 0.26 mil
  • Cantilever: 0.28 mm diameter nude boron
  • Static Compliance: 20 x 10-6 cm/dyne
  • Dynamic Compliance: 16 x 10-6 cm/dyne (100 Hz)
  • Wire Used for Coil: PCOCC
  • Terminal Pins: Brass
  • Mount: Half-inch
  • Weight: 7.6 g (0.3 oz)
  • Dimensions: 17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.7 mm (1.01") D
  • Package Contents:

  • Non-magnetic screwdriver
  • 2 washers
  • Cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2)
  • Plastic protector
  • Stylus brush
  • Ratings & Reviews

    No reviews available

    Be the first to Write a Review