• Home
  • Audio-Technica AT-VM95E/H Cartridge & Headshell Combo

Audio-Technica AT-VM95E/H Cartridge & Headshell Combo

(0) No Reviews yet
$79.00

Out of stock. Ships in 1 week.

SKU: AT-ATVM95E/H
All Audio-Technica AT-VM95-series stylus replacements are physically interchangeable, allowing you to choose among conical (AT-VMN95C), bonded elliptical (AT-VMN95E), nude elliptical (AT-VMN95EN), MicroLine AT-VMN95ML), Shibata (AT-VMN95SH) or 78rpm (AT-VMN95SP).

Audio-Technica AT-VM95E Phono Cartridge

This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

Audio-Technica AT-HS6 Headshell

The AT-HS6 is a universal ½"-mount headshell for 4-pin turntable cartridges. It features an ultra-lightweight (9 g) aluminum die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell is also equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws.
Features:
  • VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus
  • Aluminum cantilever
  • Specially wound coils increase output voltage
  • Durable low-resonance polymer housing
  • Threaded inserts – no nuts required
  • Compatible with any AT-VMN95 replacement stylus
  • Technical:
  • Frequency Response: 20-22,000 Hz
  • Channel Separation: 20 (dB at 1 kHz)
  • Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
  • Stylus Construction: Bonded round shank
  • Recommended Load Impedance: 47,000 ohms
  • Output: 4.0 mV (1 kHz, 5 cm/sec.)
  • Channel Balance: 2.0 dB (1 kHz)
  • Stylus Shape: 0.3 x 0.7 mil elliptical
  • Cantilever: Aluminum pipe
  • Mount: Half-inch
  • Replacement Stylus: AT-VMN95E
  • Coil Impedance: 3.3 k ohms (1 kHz)
  • DC Resistance: 485 ohms
  • Load Capacitance: 100 to 200 pF
  • Coil Inductance: 550 mH (1 kHz)
  • Vertical Tracking Angle: 23°
  • Dimensions: 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D
  • Weight: 6.1 g (0.22 oz)
  • Headshell:
  • Material: Aluminum
  • Connector: Aluminum
  • Weight: 9.0 g (0.3 oz), including lead wire
  • Dimensions: 13.0 mm (0.5") H × 21.4 mm (0.8") W × 48.9 mm (1.9") D
  • Ratings & Reviews

    No reviews available

    Be the first to Write a Review