Audio-Technica AT-VM95E Phono Cartridge
All Audio-Technica AT-VM95-series stylus replacements are physically interchangeable, allowing you to choose among conical (AT-VMN95C), bonded elliptical (AT-VMN95E), nude elliptical (AT-VMN95EN), MicroLine AT-VMN95ML), Shibata (AT-VMN95SH) or 78rpm (AT-VMN95SP).
Audio-Technica AT-VM95E Phono CartridgeThis VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus Aluminum cantilever Specially wound coils increase output voltage Durable low-resonance polymer housing Threaded inserts – no nuts required Compatible with any AT-VMN95 replacement stylusTechnical: Frequency Response: 20-22,000 Hz Channel Separation: 20 (dB at 1 kHz) Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) Stylus Construction: Bonded round shank Recommended Load Impedance: 47,000 ohms Output: 4.0 mV (1 kHz, 5 cm/sec.) Channel Balance: 2.0 dB (1 kHz) Stylus Shape: 0.3 x 0.7 mil elliptical Cantilever: Aluminum pipe Mount: Half-inch Replacement Stylus: AT-VMN95E Coil Impedance: 3.3 k ohms (1 kHz) DC Resistance: 485 ohms Load Capacitance: 100 to 200 pF Coil Inductance: 550 mH (1 kHz) Vertical Tracking Angle: 23° Dimensions: 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D Weight: 6.1 g (0.22 oz) Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers