Audio-Technica AT-VM95EN/H Cartridge & Headshell Combo
All Audio-Technica AT-VM95-series stylus replacements are physically interchangeable, allowing you to choose among conical (AT-VMN95C), bonded elliptical (AT-VMN95E), nude elliptical (AT-VMN95EN), MicroLine AT-VMN95ML), Shibata (AT-VMN95SH) or 78rpm (AT-VMN95SP).
Audio-Technica AT-VM95EN Phono CartridgeThis VM95 Series cartridge with 0.3 x 0.7 mil elliptical nude stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Audio-Technica AT-HS6 HeadshellThe AT-HS6 is a universal ½"-mount headshell for 4-pin turntable cartridges. It features an ultra-lightweight (9 g) aluminum die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell is also equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws.
VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus Aluminum cantilever Specially wound coils increase output voltage Durable low-resonance polymer housing Threaded inserts – no nuts required Compatible with any AT-VMN95 replacement stylusTechnical: Frequency Response: 20-23,000 Hz Channel Separation: 22 (dB at 1 kHz) Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) Stylus Construction: Nude round shank Recommended Load Impedance: 47,000 ohms Output: 3.5 mV (1 kHz, 5 cm/sec.) Channel Balance: 2.0 dB (1 kHz) Stylus Shape: 0.3 x 0.7 mil elliptical Cantilever: Aluminum pipe Mount: Half-inch Replacement Stylus: AT-VMN95EN Coil Impedance: 3.3 k ohms (1 kHz) DC Resistance: 485 ohms Load Capacitance: 100 to 200 pF Coil Inductance: 550 mH (1 kHz) Vertical Tracking Angle: 23° Dimensions: 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D Weight: 6.1 g (0.22 oz)Headshell: Material: Aluminum Connector: Aluminum Weight: 9.0 g (0.3 oz), including lead wire Dimensions: 13.0 mm (0.5") H × 21.4 mm (0.8") W × 48.9 mm (1.9") D