Audio-Technica AT-VM95SP/H Cartridge & Headshell Combo
All Audio-Technica AT-VM95-series stylus replacements are physically interchangeable, allowing you to choose among conical (AT-VMN95C), bonded elliptical (AT-VMN95E), nude elliptical (AT-VMN95EN), MicroLine AT-VMN95ML), Shibata (AT-VMN95SH) or 78rpm (AT-VMN95SP).
Audio-Technica AT-VM95SP Phono CartridgeThis VM95 Series cartridge with 3.0 mil conical stylus fits half-inch mount turntables. While this cartridge is designed to play 78 RPM mono records, it is, nevertheless, a stereo cartridge, allowing users to choose between the left and right channels, which can be especially helpful in archiving applications to minimize noise and distortion. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Audio-Technica AT-HS6 HeadshellThe AT-HS6 is a universal ½"-mount headshell for 4-pin turntable cartridges. It features an ultra-lightweight (9 g) aluminum die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell is also equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws.
VM95 Series dual magnet cartridge with 3.0 mil conical stylus for 78 RPM records Aluminum cantilever Specially wound coils increase output voltage Durable low-resonance polymer housing Threaded inserts – no nuts required Compatible with any AT-VMN95 replacement stylusTechnical: Frequency Response: 20-20,000 Hz Channel Separation: NA Vertical Tracking Force: 4.5-5.5 g (5.0 g standard) Stylus Construction: Bonded round shank Recommended Load Impedance: 47,000 ohms Output: 2.7 mV (1 kHz, 5 cm/sec.) Channel Balance: 1.5 dB (1 kHz) Stylus Shape: 3.0 mil conical Cantilever: Aluminum pipe Mount: Half-inch Replacement Stylus: AT-VMN95SP Coil Impedance: 3.3 k ohms (1 kHz) DC Resistance: 485 ohms Load Capacitance: 100 to 200 pF Coil Inductance: 550 mH (1 kHz) Static Compliance: 12 x 10-6 cm/dyne Dynamic Compliance: 2 x 10-6 cm/dyne (100 Hz) Vertical Tracking Angle: 23° Dimensions: 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D Weight: 6.1 g (0.22 oz)Headshell: Material: Aluminum Connector: Aluminum Weight: 9.0 g (0.3 oz), including lead wire Dimensions: 13.0 mm (0.5") H × 21.4 mm (0.8") W × 48.9 mm (1.9") D