• Home
  • Audio-Technica AT6006R Tonearm Safety Riser

Audio-Technica AT6006R Tonearm Safety Riser

1 Review
$129.00
SKU: AT-AT6006R
Designed to mount on a manual turntable, the AT6006R Safety Raiser automatically lifts the tonearm at the end of a record, protecting the stylus from damage. The raiser is equipped with a highly sensitive release antenna and a hydraulic lift with rubber lift bar, ensuring safe, smooth and dependable operation. Height adjustment knob and included spacers allow the raiser to be used with a wide variety of turntables with different tonearm heights.

Below is a working list of turntables that Needle Doctor has found the AT6006R to be compatible (or not compatible) with:Compatible with:
  • Audio Technica AT-LP5
  • Audio Technica AT-LP7
  • Cambridge Audio Alva TT
  • Clearaudio Concept/Concept Wood
  • Clearaudio Performance DC/Performance DC Wood
  • Mobile Fidelity StudioDeck
  • Mobile Fidelity UltraDeck
  • Music Hall MMF-5/MMF-5SE/MMF-5.1/MMF-5.1SE/MMF-5.3/MMF-5.3SE
  • Music Hall MMF-7/MMF-7.1/MMF-7.3
  • Music Hall MMF-9/MMF-9.1/MMF-9.3
  • Music Hall MMF-11.1
  • NAD C588
  • ProJect RPM 3 Carbon
  • ProJect Xtension 9
  • ProJect RPM 10 Carbon
  • ProJect Xtension 10
  • ProJect Xtension 12
  • Rega P1/RP1/Planar 1
  • Rega P2/Planar 2
  • Rega P3/P3 2000/P3-24/RP3/Planar 3
  • Rega P5
  • Rega P6/RP6/Planar 6
  • Rega P7
  • Rega P9
  • Rega P25
  • Rega RP40
  • Sota Moonbeam
  • Sota Comet
  • NOT Compatible with:
  • Audio Technica AT-LP120X
  • Audio Technica AT-LP120/AT-LP120 USB
  • Audio Technica AT-LP140 USB
  • Audio Technica AT-LP1240
  • Clearaudio Innovation series
  • Music Hall MMF-1.3
  • Music Hall MMF-1.5
  • Music Hall MMF-2.1/MMF-2.2/MMF-2.3/MMF-2.3SE
  • Pioneer PLX-500
  • Pioneer PLX-1000
  • ProJect 1.2
  • ProJect Debut Series
  • ProJect RPM-1.3 Carbon
  • ProJect Xpression series
  • Rega RP8/Planar 8 Rega RP10
  • Sota Sapphire
  • Sota Nova
  • Sota Cosmos
  • Technics SL-1200 Mk2/SL-1200 M3D/SL-1200 Mk5/SL-1200GR
  • Features:
  • Lifts tonearm automatically at the end of a record, protecting stylus tip
  • Hydraulic lift with rubber lift bar operates safely and smoothly
  • Can be mounted on a variety of turntables with different tonearm heights
  • Technical:
  • Dimensions: 14 mm (0.55") diameter × 27 mm (1.06") to 39 mm (1.54") height*
  • Lift bar movable width: 3 mm (0.12")
  • Weight: Approx. 21 g (0.74 oz)
  • Accessories: Double-sided tape ×4, Spacer ×2 (14 mm (0.55") diameter × 12 mm (0.47") height; 14 mm (0.55") diameter × 24 mm (0.94") height)
  • *In standby, height can be adjusted by using the height-adjustment knob and included spacers.

    Ratings & Reviews

    1 review

    • 4 stars
    • 0 reviews
    • 3 stars
    • 0 reviews
    • 2 stars
    • 0 reviews
    • 1 star
    • 0 reviews

    Huge improvement over the Qup

    by -

    I replaced my Qup with the 6006 safety riser. What an improvement, instead of the bounce that the spring produced with the Qup, the 6006 gently rises the tonearm above the lp. It removed my concerns about having the stylus slammed onto the record surface with the bounce that the Qup produced. Plus, the appearance on the turntable is more pleasing to the eye. It was an easy install on my Audio Technica LP5, (as it should be) and also fits on my Rega Planar 3 (2016). I mounted the 6006 with a 3M clear mounting square vs. the tack that was included due to not wanting to have any residue on the plinth that some sticky tacks will leave. I did this with the Qup and was able to have a clean surface to mount the 6006. It is pricier than the Qup but well worth the investment. Simply put it does what it is supposed to do! Finally, a big thanks to the team at Needle Doctor. The staff is knowledegable, personable, and provide recommendations that fit the customers needs.