Audio-Technica VM750SH Phono Cartridge
Audio-Technica VM750SHThe VM750SH Shibata stylus cartridge is a premier 700 Series model in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM750SH is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s Shibata stylus provides greater surface contact with the record groove than an elliptical stylus does, resulting in the pickup of ultra-high frequencies with less groove stress and distortion. Includes mounting hardware.
Audio-Technica VM Technology - Closer to the CutterheadA cutter head carves out the record grooves. The modulations in the groove are “analog” mechanical equivalents of the original audio signals. To “read” these modulations, Audio-Technica developed the patented Dual Magnet design which duplicates the structure of the cutter head. Instead of using a single, large magnet, the two magnets are arranged in the shape of a V. The two magnets are positioned precisely to match positions of the left and right channels in the stereo groove walls. Consequently, the VM design provides outstanding channel separation, extended frequency response and superb tracking. All models feature high-purity 6N-OFC (99.9999% pure oxygen free copper) wiring for maximum sonic purity and extraordinary resolution of fine musical detail.
VM dual magnet cartridge with Shibata stylus Aluminum tapered cantilever Paratoroidal coils improve generating efficiency Center shield plate between the left and right channels reduces crosstalk Die-cast aluminum alloy housing reduces vibration and adds a natural electrical shield
Frequency Response: 20-27,000 Hz Channel Separation: 30 dB (1 kHz) Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) Stylus Construction: Nude square shank Recommended Load Impedance: 47,000 ohms Output: 4.0 mV (at 1 kHz, 5 cm/sec) Channel Balance: 1.0 dB (1 kHz) Stylus Shape: 2.7 x 0.26 mil Shibata Cantilever: Aluminum tapered pipe Mount: Half-inch Replacement Stylus: VMN50SH Coil Impedance: 2,700 ohms (1 kHz) DC Resistance: 800 ohms Load Capacitance: 100-200 pF Coil Inductance: 460 mH (1 kHz) Static Compliance: 40 x 10-6 cm/dyne Dynamic Compliance: 10 x 10-6 cm/dyne (100 Hz) Vertical Tracking Angle: 23° Dimensions: 17.3 mm (0.7") H x 17.0 mm (0.7") W x 28.2 mm (1.1") D Weight: 8.0 g (0.3 oz)
Ratings & Reviews
A worthy upgrade for the lp12
by Gary hanna
Just bought one to rejuvenate my trusted lp 12
1st impressions are very pleasing. Fitted myself but plan to bring it to dealer for proper set up