• Home
  • Dynavector TE Kaitora Rua Cartridge

Dynavector TE Kaitora Rua Cartridge

(0) No Reviews yet
$3,450.00

Special order item. Call for information.

SKU: DY-TEKAITORA
Dynavector's latest cartridge is called Te Kaitora, Maori for The Discoverer. The name gives away the fact that Te Kaitora was collaboration between Dynavector New Zealand and Dynavector Japan. New Zealand have been responsible for a range of high quality pre amps, power amps and phono stages. They encouraged Dynavector Japan to design a no holds barred cartridge and Te Kaitora is the result.

It is a nude design, that is it has no cover. This helps keep weight down, removes the chance of information losing vibrations and does not allow dust to collect as is possible in enclosed designs.

The cartridge motor is attached to a titanium headblock. The cartridge is mounted to the arm via screwthreads in this headblock. Titanium was picked for high strength and lightness.

Dynavector chose Ogura's line contact Pathfinder (PF) stylus attached to a solid boron cantilever for Te Kaitora. The coils are of very fine silver wire wound using Dynavector founder Dr Tominari's own design of coilwinding machine. This set up gives a good output level of 0.25mV with a very light and agile coil assembly which leads to secure tracking and a 'quick' sound.

On the front polepiece there is another coil which is Dynavectors flux damper. Another unique feature to Dynavector is their softened magnetism, ferrous metal strips arranged to alter the magnetic field. These two features combine to eliminate the distortion caused by excess magnetic flux produced by the high energy magnets used in modern cartridges.

A compliance of 10 CU and weight of 8.8 grams make it compatible with arms from Well Tempered, Linn, Naim, SME and others. Naim Aro users should note that Te Kaitora has the correct stylus point to mounting hole distance for their arms.
Technical:
  • Low output moving coil cartridge with flux damper and softened magnetism
  • Output 0.25mV ( at 1KHz, 5cm/sec)
  • Frequency response 20-50,000Hz 20-20,000Hz ± 1dB
  • Channel balance 1dB ( at 1KHz)
  • Channel separation 30dB ( at 1KHz)
  • Impedance R=4 ohms, L=10 microH
  • Compliance 10 x 10-6 cm/dyne
  • Stylus Line contact PF
  • Cantilever 0.3mm diameter solid boron
  • Coils Silver wire
  • Head Frame Titanium
  • Weight 8.8 grams
  • Tracking force 1.8 - 2.2 grams
  • Ratings & Reviews

    No reviews available

    Be the first to Write a Review