• Home
  • Hunt EDA Carbon Fiber Brush

Hunt EDA Carbon Fiber Brush

3 Reviews

Out of stock - Ships in 1 week.



The Hunt EDA record cleaning brush contains over 1,000,000 anti static carbon fibers. The fibers are in two rows with a static grounding pad centered between. The grounding pad supports the tiny carbon fibers and keeps them erect so they can dig down deep into the groove and extract trapped dust. Look at a record. It contains microscopic undulations inside the groove wall smaller than a human hair that the naked eye cannot see. This is how music is stored on an lp. And this is why fat pads will not do. A fat pad can't get down into the groove. It simply brushes over the top and removes the surface dust. The real culprit is the dust that's trapped deep in the record groove. The only way to remove this dust is with the hunt eda. It's super easy to use. Don't push it down on the record simply support the back of the brush with your hand and let the brush's weight do the work. You want to keep those bristles erect not rolled over. The hunt eda comes with it's own support stand which also doubles as a cleaning tool. Slide the stand back and forth across the carbon fiber bristles to remove the dust. This will keep the carbon fibers clean and free from your messy hand oils. Use alone or ideally with a zerostat gun. First, destat the record with the gun then use the hunt eda to brush the dust off. There is no finer dry record cleaning method.

Stereophile Recommended Component

"Properly used (held with the bristles at a low angle against the approaching grooves and slowly slid off the record), these are the most effective dry record-cleaners avail-able. (JGH disagrees, feeling that they leave the dust on the record.) No substitute for an occasional wet wash." - Class D, 10/96, Page 141, review Volume 10 #8.

Ratings & Reviews

3 reviews

  • 3 stars
  • 0 reviews
  • 2 stars
  • 0 reviews
  • 1 star
  • 0 reviews



I have had a lot of different brushes and this one is by far the best. you can really feel it cleaning out the grooves taking out all the dust and static, it's very well made and very high quality. wish I had got one sooner.



I agree with the other review. I've had and still have two regular style carbon fiber brushes, but this Hunt EDA is superior in every way. The other brushes remove dust just fine, but don't always remove static. I have a Zerostat gun that I don't have to use as much with the Hunt EDA. I also have the Discwasher which I use for basic dust removal before cleaning vinyl on my VPI 16.5. This brush is worth the money.



The Hunt EDA is my favorite record cleaning brush for day-to-day maintenance. It is easy to use and effective, and does a good job of cleaning dust off records between wet cleanings on my Nitty Gritty record vacuum. I recommend it over both Discwasher (the current Discwasher brush is nothing like the famed original) and the Audioquest carbon fiber brush.