Music Hall MMF-1.3 Turntable
Music Hall's new entry-level model is a feature-rich 3-speed 'table unrivaled in its price-to-performance value. With a built-in phono preamp and quality pre-mounted cartridge, the MMF1.3 comes with everything you need to start spinnin' records minutes after cracking the seal.
belt drive electronic speed controlled motor 33 1/3, 45, and 78 rpm aluminum tonearm with removable headshell piano black MDF plinth vibration-damping rubber platter mat Audio Technica AT3600L cartridge ($50 value) aluminum platter dustcover built-in phono pre-amp removable RCA cables vibration damping feetTechnical: power supply: DC12V，2.0A universal power supply consumption: 4W dimensions: 17.1(W) x 14.5(D) x 4.2(H) in. weight: 11lbs. | 5Kg type: 3-speed full manual motor: DC motor driving method: belt drive turntable platter: 296mm dia. aluminum die-cast speeds: 33 1/3, 45, and 78rpm wow and flutter (typical): less than 0.1% WTD at 3KHz RMS wow and flutter (limit): Less than 0.15% WTD at 3KHz RMS S/N ratio: more than 62dB speed tolerance: 3000Hz +/-1%Cartridge: type: moving magnetic cartridge stylus: diamond stylus RIAA: 20Hz~20KHz: +1/-3 dB model: AT3600L output voltage: 2.5mV +/- 3dB at 1KHz 3.54cm/sec channel separation: more than 18dB channel balance: within 2dB at 1KHz frequency response: 0 +/-3dB at 10KHz (Value at 10KHz based on value at 1KHz) tracking force: 3.5 ± 0.5 gTonearm: type: dynamic balanced straight shaped w/soft damping control effective arm length: 221.5mm overhang: 19mm offset angle: 25.61 tracking error angle: 3 degree or less stylus pressure adjustment method: rotation movability arm lifter: oil damper type height of arm lifter: 7.5mm (record to stylus w/ cuing lever up)