• Home
  • Ortofon 2M Black PNP Mk2 Integrated Cartridge & Headshell

Ortofon 2M Black PNP Mk2 Integrated Cartridge & Headshell

(0) No Reviews yet

Ortofon 2M Black PNP Mk 2

The new PNP Mk2 versions are lighter than the original PNPs. They can be used on the Technics 1200 without the auxiliary weight. Also a good match for the similar current Audio Technica and Pioneer tonearms

The 2M PNP headshell is a practical and elegant solution for our customers who wish direct and easy mounting and replacement on their tonearm. The combination of 2M PNP headshell and 2M Series cartridge adds unique distinction to the turntable!
  • Universal mount fitting a wide range of tonearms.
  • The headshell body is manufactured from a special compound used for Medical industry, ensures high rigidity while reducing unwanted vibration
  • Elegant hi-tech design
  • Length 52mm. Headshell with a 2M cartridge pre-mounted provides correct Baerwald alignment with Ortofon TA-110/ TA-210 tonearms, likewise with the major part of tonearms with universal mount
  • Shibata diamond stylus – the same diamond as on the acclaimed MC Jubilee
  • Slim, highly polished diamond profile allows an exceedingly wide contact area to the groove walls and ensures notably detailed reproduction throughout the spectrum, including even the most high frequency groove information
  • Cartridge body used for the 2M Black is manufactured from a newly-developed Lexan DMX Piano Black, a revolutionary material which ensures high rigidity while eliminating unwanted resonances
  • The 2M Black uses a special upgraded engine, featuring split pole pins with a silver plated copper wire
  • The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps
  • Technical:
  • Output voltage at 1000 Hz, 5cm/sec.: 5 mV
  • Channel balance at 1 kHz: 1 dB
  • Channel separation at 1 kHz: 26 dB
  • Channel separation at 15 kHz: 15 dB
  • Frequency range at - 3dB: 20-31.000 Hz
  • Frequency response: 20-20.000 + 2 / - 0 dB
  • Tracking ability at 315Hz at recommended tracking force: 80 µm
  • Compliance, dynamic, lateral: 22 µm/mN
  • Stylus type: Nude Shibata
  • Stylus tip radius: r/R 6/50 µm
  • Tracking force range: 1,4-1,7g (14-17 mN)
  • Tracking force, recommended: 1,5 g (15 mN)
  • Tracking angle: 20°
  • Internal impedance, DC resistance: 1,2 kOhm
  • Internal inductance: 630 mH
  • Recommended load resistance: 47 kOhm
  • Recommended load capacitance: 150-300 pF
  • Weight with a 2M cartridge pre-mounted: 20g
  • Cartridge colour, body/stylus: Black/Black
  • Replacement stylus unit: 2M Black (interchangeable with 2M Bronze)
  • Ratings & Reviews

    No reviews available

    Be the first to Write a Review